post

How to Draw… Master Sazuke

The third character in our on-going “How to Draw…” series is our favorite Ninja-Emu, Master Sazuke! Sazuke has always been fun to draw and he’s fairly simple for beginners! Since he is an emu and a ninja, it has allowed me to put him in some pretty crazy poses and funny situations over the years.

Please note that I am only showing the 3/4 view at this time and I will update this post later with a front view tutorial (I think he’s more fun to draw in 3/4!).

Some Helpful Tips Before We Get Started

Please remember to stay loose and draw lightly. Do not bear down on your pencil and allow the shapes to build up. It sometimes helps to practice drawing circles first to help you loosen up!

Please read some of the Character Design posts I’ve done as well; they’re sure to be helpful in helping improve your drawing skills.

Master Sazuke 3/4 View

Let’s draw Master Sazuke from a 3/4 view!

This slideshow requires JavaScript.

Let’s break this down below.

  1. Start with a circle. Add a vertical guideline through the center of the circle top to bottom. Then, add a horizontal guideline through the center of the circle. These will both have a slight curve to them now, since Sazuke is turning his head to a 3/4 view.
  2. Add the mask. Master Sazuke’s mask is a rounded rectangle shape that sits on top of the horizontal guideline.
  3. Top of the beak. In the center of the mask, draw a bump that curves outside of the circle. This creates the tip of Sazuke’s beak.
  4. Bottom of the Beak. Starting at the tip of the beak, where you left off, draw a line back towards the circle, creating Master Sazuke’s cone-shaped beak.
  5. Cheeks. Draw a backwards C-shaped line that curves from the bottom of the beak up to the mask and touches the original bump where you started Sazuke’s beak.
  6. Teeth. Master Sazuke’s teeth are almost always showing, no matter what mood he is in. His teeth are a triangle shape.
  7. Bite. Draw a curved line horizontally through the teeth to create the bite between his top and bottom teeth.
  8. Draw the neck. Master Sazuke’s neck is basically just a tube shape that will connect to your original circle, tapering slightly. You can draw lightly through the beak to make sure it connects.
  9. Eyes shapes. Master Sazuke’s eyes are often squinting, and they can be represented with two slanted lines tapering from thick to thin.
  10. Clean up. Erase all of your guidelines, including the horizontal and vertical guides, parts of the original circle, and any other guidelines you may have drawn.
  11. Color and complete! Master Sazuke’s ninja outfit is all-black, and he has a very bright orange bill. His feathers under the mask are peach, but his hands and body are a greenish-brown color!

And there you have it!

I hope you enjoyed this post as much as I did writing it. Truth is, I love teaching things like this and I really miss it. It was a huge part of my younger adult life when I was working for Disney and I just don’t have the opportunity to do it anymore.

I plan to teach several more of my Schmitty’s Toons! characters in this series. If you have a favorite that you would like to do next, please notify me in the comments.

In the comments below, I would also love to see your beautiful creations! Please don’t be afraid to share!

Schmitty out.

post

How to Draw… Puffin Stuff

For the second character in our on-going “How to Draw…” series, I would like to focus on the puffin character from my original short, “Puffin Stuff.” Oddly enough, I have never officially named this character. I have come up with several over the years, but none of them ever seemed to stick. So now he is simply referred to as “Puffin” or “Puffin Stuff.”

Some Helpful Tips Before We Get Started

Please remember to stay loose and draw lightly. Do not bear down on your pencil and allow the shapes to build up. It sometimes helps to practice drawing circles first to help you loosen up!

Please read some of the Character Design posts I’ve done as well; they’re sure to be helpful in helping improve your drawing skills.

Puffin Stuff Front View

First, lets take a look at Puffin Stuff from the front view:

See, it’s easy and you can do it too! Lets break it down step by step.

  1. Start with a circle. Add a vertical guideline through the center of the circle top to bottom. Then, add a horizontal guideline below the halfway point, approximately 1/3 of the way from the bottom.
  2. Add eye shapes. Puffin has two small circular eyes. There should be approximately one eye length between each.
  3. Add the mask – Puffin Stuff’s mask consist of two large, egg-shaped ovals. They should wrap around the bottom of the eye and touch the top of the circle.
  4. Eyebrows. Draw two upside-down ‘U’ shapes, one above each of the mask shapes. The curve of the eyebrow should mimic the same curve as the top of his mask.
  5. Bridge of bill and cheeks. Draw three more upside-down ‘U’ shapes. The first one is stretched out in between his eyes, curving from the middle of the left eye to the middle of the right eye. This is the bridge of his bill, or where his nose would be (if he had one). The other two, will make up his cheeks on either side. They will curve off of the eye and outside of the circle for now.
  6. Add his tuft of feathers. This is just a ‘shark fin’ shape that sits right on top of his eyebrows.
  7. Top of the bill. At the bottom of the horizontal guideline, draw another upside down ‘U’. It will just float here for now.
  8. Smile/mouth line. On both sides, draw an ‘S’ curve that comes to a point when they meet in the middle at the vertical guideline.
  9. Dimples. On the top of each side of Puffin’s smile, add a small curved line.
  10. Stripes on top of the bill. Puffin’s have very unique markings on their bills. The ones on Puffin Stuff’s are two upside down ‘U’ shapes.
  11. Finish off the chin. Starting where you ended your cheeks, draw a large ‘U’ to connect them both.
  12. Stripes on bottom of the bill. To finish off Puffin’s unique markings, draw two ‘U’ shapes that are a little wider than the ones on top. They should touch the bottom of the chin.
  13. Draw the neck and connect the beak. Puffin has a wide neck that is as wide as your original circle shape. Draw two lines, tapering outward slightly. Above the cheeks on either side, draw a curved line off the top of the cheek that connects back to the side of the circle. This is the muscle that connects his beak to his head.
  14. Add the white part of his neck. Draw two more tapered lines inside the neck area. This is the white part of the character.
  15. Add pupils. Puffin’s pupils are circles, approximately 1/2 the size of his eye. Draw the entire shape in the corner of his eye, making sure that it stays grounded.
  16. Clean up. Erase all of your guidelines, including the horizontal and vertical guides, parts of the original circle, and any other guidelines you may have drawn.
  17. Color and complete! Puffin’s feathers are black and white and he has robin’s egg blue eyes. His beak is a bright orange with dark red and black stripes.

That’s it!

Puffin Stuff 3/4 View

Now that you’re a master at drawing Puffin Stuff from the front view, lets take a look at him from a 3/4 angle:

Puffin from 3/4 has very similar steps as Puffin from a front view. Let’s take a look below.

  1. Start with a circle. Add a vertical guideline through the center of the circle top to bottom. Then, add a horizontal guideline towards the bottom of the circle, approximately 1/3 of the way from the bottom. These will both have a slight curve to them now, since Puffin is turning his head to a 3/4 view.
  2. Add eye shapes. Puffin has circle-shaped eyes. The one on the left is in perspective and drawn smaller due to the turn of his head.
  3. Mask around the eyes. Puffin Stuff’s mask consist of two large, egg-shaped ovals. They should wrap around the bottom of the eye and nearly touch the top of the circle.
  4. Eyebrows. Draw two upside-down ‘U’ shapes, one above each mask shape. The curve of the eyebrow should mimic the same curve as the top of his mask. Again, the one on the left is smaller since it is further away.
  5. Bridge of bill and cheeks. Draw three more upside-down ‘U’ shapes. The first one is stretched out in between his eyes, curving from the middle of the left eye to the middle of the right eye. This is the bridge of his bill, or where his nose would be (if he had one). The other two, will make up his cheeks on either side. They will curve off of the eye and outside of the circle for now.
  6. Add his tuft of feathers. This is just a ‘shark fin’ shape that sits right on top of his eyebrows.
  7. Top of the beak. At the bottom of the left eye, draw another upside down ‘U’. It will just float here for now.
  8. Bottom of the beak/smile. Starting below his right cheek, draw an elongated ‘S’ shape that creates a point at the tip of his beak.
  9. Dimples! Under the cheek at the top of the smile, draw a curved line to create a dimple.
  10. Stripes on top of the beak. Draw two upside down ‘U’ shapes to create the stripes at the end of Puffin’s beak.
  11. Finish off the cheeks with Puffin’s chin. Starting where you ended your cheeks, draw a large curved line that swoops back up to meet the bottom of his beak.
  12. Stripes on bottom of the beak. Draw two ‘U’ shapes to create the stripes on the bottom of Puffin’s beak. They should be wider than the ones on top.
  13. Draw the neck and connect the beak. Puffin’s neck is as wide as your original circle and consists of two slightly tapered lines. Above the cheeks on either side, draw a curved line off the top of the cheek that connects back to the side of the circle. This is the muscle that connects Puffin’s beak to his head.
  14. Add pupils. Puffin’s pupils are circle shapes. Draw the entire circle in the corner of his eye, making sure that it stays grounded. The pupil takes up about half of the total height of his eye.
  15. Clean up. Erase all of your guidelines, including the horizontal and vertical guides, parts of the original circle, and any other guidelines you may have drawn.
  16. Color and complete! Puffin’s feathers are black and white and he has robin’s egg blue eyes. His beak is a bright orange with dark red and black stripes.

And there you have it!

I hope you enjoyed this post as much as I did writing it. Please keep your eye out for more “How to Draw…” Schmitty’s Toons! characters soon! I plan to teach several more of my Schmitty’s Toons! characters in this series. If you have a favorite that you would like to do next, please notify me in the comments.

In the comments below, I would also love to see your beautiful creations! Please don’t be afraid to share!

Schmitty out.